Name each physical quantity and keep its units consistent. Recalling an equation is one step in modeling a situation, rather than a substitute for identifying the applicable assumptions.
Where this helps
Connecting quantities and solving physics problems more fluently.
Before you start
Try the examples to see what you’ll practice. Check the answer form and any stated conditions.
Start at x₀ = 2 m, with velocity v₀ = 3 m/s and constant acceleration a = −1 m/s². After t = 2 s:
x = 2 + 3 × 2 + (1/2) × (−1) × 2² = 6 m.
Use x = x₀ + v₀t + (1/2)at². The terms are the starting position, motion at the starting velocity, and the extra change caused by acceleration. Keep one positive direction for every signed quantity.
Velocity with constant acceleration
Start with velocity v₀ = 5 m/s and constant acceleration a = −2 m/s². After t = 3 s:
v = 5 + (−2) × 3 = −1 m/s.
Use v = v₀ + at. Acceleration tells how much velocity changes each second. A negative final velocity means motion in the negative direction, not a negative speed.
Energy from height
A 2 kg object is 3 m above a chosen zero height. Using g ≈ 10 m/s²:
U = mgh ≈ 2 × 10 × 3 = 60 J.
Here m is mass, g is gravitational acceleration, and h is height above that reference. Near Earth’s surface, where g is nearly constant, lifting higher increases gravitational potential energy.
Energy from motion
A 2 kg object moves at a speed of 3 m/s.
K = (1/2) × 2 × 3² = 9 J.
Kinetic energy is K = (1/2)mv², where m is mass and v is speed. Square the speed before multiplying. This classical formula applies at speeds far below the speed of light.
Mass times velocity
A 3 kg object has velocity −2 m/s along a chosen axis.
p = mv = 3 × (−2) = −6 kg·m/s.
Momentum is mass m times velocity v. Its sign or direction follows the velocity. This is the classical formula for speeds far below the speed of light.
Use the net force
A 3 kg object accelerates at −2 m/s² along a chosen axis.
F = ma = 3 × (−2) = −6 N.
F is the net force, meaning all forces added with their directions. For constant mass m, net force and acceleration a point in the same direction.
Voltage across a resistor
An ohmic resistor has resistance R = 8 Ω and current I = 0.5 A.
V = IR = 0.5 × 8 = 4 V.
Multiply current by resistance to find the voltage drop. Use this rule where the resistor’s resistance stays constant. Define positive current from the higher-voltage side to the lower-voltage side.
Wavelength times frequency
A wave has wavelength λ = 3 m and frequency f = 4 Hz.
v = fλ = 4 × 3 = 12 m/s.
Frequency counts cycles per second. Each cycle spans one wavelength, so multiply them to find the phase speed v in a uniform medium.
Try a few examples
Real practice. Real progress.
Example 1 of 4
complete the constant acceleration position formula
Acceleration a is constant over real elapsed time t and all signed quantities use one coordinate convention.